- Turn on printer and connect USB cable
- Download Resetter Epson ET-3710 Printer
- Extract File From Zip Folder
- Open AdjProg.exe - Accept
- Particular adjustment mode
- Waste ink pad counter - OK
- Give check box Main Pad Counter
- Click Check – OK
- Click Initialization – OK
- Finish and then close adjustment program Epson ET-3710
- Turn off printer and then turn on back.
Q. Why You Need This?
A. Resetting your Epson printer Modern Epson printers have built-in software/firmware that counts the prints that you do and each model has a set limit that will generate messages, saying something like "your printer requires maintenance" or "parts inside your printer may be worm" or " service required". These messages will continue unless you reset the 'Protection Counter', this period is called the 'Overflow'. Each model also has a set amount of prints allowed on the Overflow, after which your printer will stop working and lock you out completely (we call this 'Lock Out'), usually with two alternating flashing lights on the printer.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.